HONDA Brake Caliper 43019SAAJ51 43019SAAJ50 344400
Reference No.
A.B.S. | 722011 | ||
APEC braking | LCA346 | ||
ATE | 24.3304-1713.7 | ||
BLUE PRINT | ADH245508 | ||
BLUE PRINT | ADH24541N | ||
BOSCH | 0 986 134 220 | ||
Brake ENGINEERING | CA2561 | ||
BREMBO | F 28 102 | ||
BUDWEG CALIPER |
344400 |
Part List
203012 (REPAIR KIT) |
233012 (PISTON) |
183012 (SEAL, PISTON) |
169121 (GUIDE SLEEVE KIT) |
Compatible Applications
HONDA JAZZ II (GD) (2002/03 – 2008/12) |
HONDA JAZZ III (GE) (2007/10 – /) |
Assembling:
1. Install the brake disc and brake pads if necessary.
2. Install the new brake caliper and tighten bolts to the specified torque.
3. Tighten the brake hose and then remove the pressure from the brake pedal
4. Make sure that all movable parts are lubricated and glide easily.
5. Re-connect the pad wear sensor wires if fitted.
6. Bleed the brake system by following the vehicle manufacturer’s guidelines.
7. Mount the wheels.
8. Tighten the wheel bolt/nuts with a torque wrench to the correct torque settings.
9. Check the brake fluid and replenish if necessary. Follow the operating instructions.
10. Check that there is no leakage of brake fluid.
11. Test the brakes on a brake test stand and carry out a test run.